Miss Hybrid
- Thread starter blueboy80
- Start date
I have dropped my three votes twice now, in round three. I once worked at a post office, so I can stuff boxes all day long. Thank you Miss, for the mention.
Mandy! really nice work on the photoshop edit. The pic of you and Miss looks really great! I can't wait to what Riccardo comes up with because of it.
H Magenta, awesome siggy. Excellent!
Mandy! really nice work on the photoshop edit. The pic of you and Miss looks really great! I can't wait to what Riccardo comes up with because of it.
H Magenta, awesome siggy. Excellent!
Outstanding work Miss H. That is brilliant! The post it notes, even more so, ingenious! :hatsoff:
Very well done, Pasty! Really excellent gif!
Thank you Christophe
Thank you Christophe, i'll post another later.
One, TWO THREE rammed home today......just for a change 
I got a little chablied last night,oh dear. I had been hard at it getting the videos ready and trying to make sense of what Felixstowe though was a newsletter. So I had glass and then thought, "that's a nice shaped bottle".
I am looking at it now and I am thinking. "That's ........
Back in a few minutes
I am looking at it now and I am thinking. "That's ........
Back in a few minutes
Three votes for Miss Hybrid this morning
Done with the bottle in the meantime, Miss?
Done with the bottle in the meantime, Miss?
Three votes for Miss Hybrid this morning
Done with the bottle in the meantime, Miss?
Err yes. Now where did I put the new vote stuffing box ..........
Again some assembly instructions for the Penny Box:
1. Before cutting out the single parts carefully scarve all fold lines with a sharp *****, using a ruler.
2. Build the "waist box". It is important to curve the "ass area" as round as possible. The hatched area marked with "2" stays jutting out and is only serving to make a better and more exact fit to part 2.
3. Cut out parts 3 and 4 (head) and glue them together. No glue on the flaps though!
4. Cut out part 2. Cut out the slit in the neck area. Pass the head (3/4) flaps through the slit, fold them down to both sides and glue them to the backside of the neck/shoulder.
5. Now fould the "thorax". It stays open at the backside.
6. Glue carefully together parts 1 and 2 (glue on both areas of part 1 which are marked with "2").
7. Cut out parts 5, 5a, 5b and 6, 6a, 6b. Cutting out the stiletto heels may be easier AFTER having glued together the boots parts.
8. Glue part 5a to 5 and part 6a to 6.
9. Glue part 5 to part 1/2. It is important to properly adjust the hatched zones on the thorax and especially on the butt
10. Same procedure with part 6.
11. At last you have to add the inner sides of the boots (5b, 6b). Cut them in two parts where the "boot flap" of part 2 is glued to part 5 resp. 6.
1. Before cutting out the single parts carefully scarve all fold lines with a sharp *****, using a ruler.
2. Build the "waist box". It is important to curve the "ass area" as round as possible. The hatched area marked with "2" stays jutting out and is only serving to make a better and more exact fit to part 2.
3. Cut out parts 3 and 4 (head) and glue them together. No glue on the flaps though!
4. Cut out part 2. Cut out the slit in the neck area. Pass the head (3/4) flaps through the slit, fold them down to both sides and glue them to the backside of the neck/shoulder.
5. Now fould the "thorax". It stays open at the backside.
6. Glue carefully together parts 1 and 2 (glue on both areas of part 1 which are marked with "2").
7. Cut out parts 5, 5a, 5b and 6, 6a, 6b. Cutting out the stiletto heels may be easier AFTER having glued together the boots parts.
8. Glue part 5a to 5 and part 6a to 6.
9. Glue part 5 to part 1/2. It is important to properly adjust the hatched zones on the thorax and especially on the butt
10. Same procedure with part 6.
11. At last you have to add the inner sides of the boots (5b, 6b). Cut them in two parts where the "boot flap" of part 2 is glued to part 5 resp. 6.
