Mandy Flores

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

You know Mandy, I was starting to think you were the perfect woman. Beautiful face, sexy smile, long flowing hair, absolutely phenomenal breasts, tight firm ass and gorgeous lickable pussy that's always wet. Then I found out you're a Seahawks fan!!!!! Geez, that might be a deal breaker there.....

http://www.modelmayhem.com/portfolio/pic/22337710#

Well, maybe not. Dunno if you'd get me to cheer for the Seahawks, but you're welcome to sit on my lap during a game at Qwest field and convince me.

I was born and raised here...it's like mandatory to root for the Seacocks! I mean Seachickens...I mean HAWKS! I mess that up all the time! Here....I'll start taking those off and see if it makes you feel better...

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

Simple pic which just shows how beautiful you are.

I love it too...except Playboy for some unknown reason changeed the tone on it and it looks like I have bags under my eyes and dark nipples! Terrible lighting there!

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

For some reason I felt so guilty and dirty watching that. In order to rid myself of this guilt I had to punish myself and watch it again. Feel the guilt and watch it again. I will download it and continue watching this till the guilt is gone.

BobJustBob

Just keep repeating to yourself...."Mandy...Mandy ....Mandy...Mandy...Mandy.." and wait for the next wonderful piece of Mandyness to apear here! Or you can do what Murrdawg did and join my site! Thank you again Murrdawg!

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

I love your asshole. :rubbel:

My asshole LOVES to be LOVED!

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

Picking only one is hard(not the only thing that is) This is my favourite.

One of my first that came out really good at home! It's on my bed that I sleep in every night I think there was someone else that picked this one also...so that would make it the only pic chosen by 2 people. Nope just looked...another from this set, but a leg spread shot. I'm glad to see there are so many different favorites!

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

Thank you for sharing. That's one lucky guy you got there. I love the shot of your pretty face at the end. You look like you were in heaven, Mandy.

He IS one lucky son of a bitch!! I was in a bit of heaven...he did a really good job, with an assist from my magic wand! I love it when he stuffs his cock in while I'm still squirting...that looked awesome! Just before that he had put his face in it like he was cooling off in a sprinkler!! I laughed during that part, didn't expect it!

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

Mandy, you`re amazing.Sexy and so damn hot.Always look forward to more of your pics.xxx

Alright Hiropro.....I'll keep 'em coming...I DO have a website though if you hadn't noticed.... Hope 20 bucks wouldn't break you too much But if it does....there's plenty more to come...just go spread my posted pics around in other appropriate threads and I'll be happy

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

That's a tough choice, but this one is definitely one of my favorites.

Oh yes :drool2:

Fuck I love that whole set....I wanna eat my own pussy and suck my toes when I look at it!! LOL

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

Alright....in all seriousness....I'm considering getting a 3D printer, the kind that actually fabricates objects out of different materials. all kinds of companies are using them to make prototype parts, and then actual final assembly parts, including Boeing and Jaguar. They can make things with rubber or plastic, and I believe foam rubber. I have been asked in the past to make molds of my pussy, ass, and feet. this tends to be exspensive and time consuming to do. With these printers you just scan the part with a laser scanner, like the scan guns at the grocery store, and it completely duplicates that object...it's fucking incredible really,( if you haven't seen it type it into Youtube). Anyway....what do you think you would personally pay for a rubber full size reproduction of my, or really any of your favorite stars, body part? I think I could do it if I got around $100 per part, but don't know yet. I know some other porn stars have done their pussies and such, but I won't have a factory spitting out 100,000 of them to keep costs down...Let em know what you think!

 

[Mr. Hyde]

Re: Mandy Flores 1st thread! Let the addiction begin!

Alright....in all seriousness....I'm considering getting a 3D printer, the kind that actually fabricates objects out of different materials. all kinds of companies are using them to make prototype parts, and then actual final assembly parts, including Boeing and Jaguar. They can make things with rubber or plastic, and I believe foam rubber. I have been asked in the past to make molds of my pussy, ass, and feet. this tends to be exspensive and time consuming to do. With these printers you just scan the part with a laser scanner, like the scan guns at the grocery store, and it completely duplicates that object...it's fucking incredible really,( if you haven't seen it type it into Youtube). Anyway....what do you think you would personally pay for a rubber full size reproduction of my, or really any of your favorite stars, body part? I think I could do it if I got around $100 per part, but don't know yet. I know some other porn stars have done their pussies and such, but I won't have a factory spitting out 100,000 of them to keep costs down...Let em know what you think!

How much does one of those suckers cost? The printer.

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

How much does one of those suckers cost? The printer.

They've gotten down around $1,400 for an entry level one. Hey I know this is going to seem stupid, but I can't find where/how to start another thread....

 

[Murrdawg]

Re: Mandy Flores 1st thread! Let the addiction begin!

Mandy Flores[/URL][/B], post: 6764055, member: 550820"]Just keep repeating to yourself...."Mandy...Mandy ....Mandy...Mandy...Mandy.." and wait for the next wonderful piece of Mandyness to apear here! Or you can do what Murrdawg did and join my site! Thank you again Murrdawg!

No, thank YOU Mandy. It's been 2 glorious days of checking you out...err, I mean your website. Whew, I"m exhausted!! It's almost gonna be a relief to go back to my 12 hour shifts tomorrow. Wait a minute - 2 days without my Mandy fix?? WTF????

http://mymandygirlgalleries.net/Promo/46.jpg

Mmm, that's much better.....*g*


As for the 3D printer question. Dunno if I would pay $100 for a rubber body part...except maybe yours. I guess it would depend how real they can make it. It's an interesting idea. Let me know how that goes...

 

[Murrdawg]

Re: Mandy Flores 1st thread! Let the addiction begin!

They've gotten down around $1,400 for an entry level one. Hey I know this is going to seem stupid, but I can't find where/how to start another thread....

If you go to whichever category you want (i.e. Freeones Talk), you should see near the upper right hand corner(just above the top thread of the page) is a heading "FORUM TOOLS". It has a little arrow, that's the drop down menu. Hope that helps.*g*

 

[jitna]

Re: Mandy Flores 1st thread! Let the addiction begin!

Mandy Flores[/URL][/B], post: 6764012, member: 550820"] I don't think I get post points for fucking Jitna....

you never know until you try

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

If you go to whichever category you want (i.e. Freeones Talk), you should see near the upper right hand corner(just above the top thread of the page) is a heading "FORUM TOOLS". It has a little arrow, that's the drop down menu. Hope that helps.*g*

[/QUOTE]Oh Thank you Thank you!!

 

[jlm555]

Re: Mandy Flores 1st thread! Let the addiction begin!

I think I'm in love :rubbel:

 

[Trident1]

Re: Mandy Flores 1st thread! Let the addiction begin!

Wow you're a real firecracker!

 

[eric2136]

Re: Mandy Flores 1st thread! Let the addiction begin!

Alright....in all seriousness....I'm considering getting a 3D printer, the kind that actually fabricates objects out of different materials. all kinds of companies are using them to make prototype parts, and then actual final assembly parts, including Boeing and Jaguar. They can make things with rubber or plastic, and I believe foam rubber. I have been asked in the past to make molds of my pussy, ass, and feet. this tends to be exspensive and time consuming to do. With these printers you just scan the part with a laser scanner, like the scan guns at the grocery store, and it completely duplicates that object...it's fucking incredible really,( if you haven't seen it type it into Youtube). Anyway....what do you think you would personally pay for a rubber full size reproduction of my, or really any of your favorite stars, body part? I think I could do it if I got around $100 per part, but don't know yet. I know some other porn stars have done their pussies and such, but I won't have a factory spitting out 100,000 of them to keep costs down...Let em know what you think!

At first glance the 3-D printer sounds fascinating ! Although it still seems somewhat experimental, and, presently, its' primary commercial use appears to be for the production of extremely specialized engineering parts.

In addition to the actual printer cost, the material costs of what you would make your sexual prosthetics out of would need to be considered (foam/rubber/plastic), as well as other possible extraneous expenses involved with the production process (additional computers/ software/ equipment upkeep). Also the actual designing/scanning/duplication process seems somewhat technical and complicated.

I've seen videos discussing theoretical applications for the 3-D printer production of sex toys, but I think you might want to find someone (Pornstar/ small business entrepreneur) who is actually doing it, and making money at it, before you try it...Then you can follow their mentorship....Or if you want to be an innovator, first take an official poll on your site to determine serious interest at $100.00 per unit (based on your initial estimations).

If the interest is substantial then you would need to make an initial equipment and materials investment to create a prototype by which you could determine the actual per unit cost/price....

Then you would probably want to only take pre-orders at that price, based on the prototypes, so as to prevent going too far into the red before actually seeing the potential of profits.

Sounds like a very interesting and innovative idea, Mandy! and possibly lucrative as well !!

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

At first glance the 3-D printer sounds fascinating ! Although it still seems somewhat experimental, and, presently, its' primary commercial use appears to be for the production of extremely specialized engineering parts.

In addition to the actual printer cost, the material costs of what you would make your sexual prosthetics out of would need to be considered (foam/rubber/plastic), as well as other possible extraneous expenses involved with the production process (additional computers/ software/ equipment upkeep). Also the actual designing/scanning/duplication process seems somewhat technical and complicated.

I've seen videos discussing theoretical applications for the 3-D printer production of sex toys, but I think you might want to find someone (Pornstar/ small business entrepreneur) who is actually doing it, and making money at it, before you try it...Then you can follow their mentorship....Or if you want to be an innovator, first take an official poll on your site to determine serious interest at $100.00 per unit (based on your initial estimations).

If the interest is substantial then you would need to make an initial equipment and materials investment to create a prototype by which you could determine the actual per unit cost/price....

Then you would probably want to only take pre-orders at that price, based on the prototypes, so as to prevent going too far into the red before actually seeing the potential of profits.

Sounds like a very interesting and innovative idea, Mandy! and possibly lucrative as well !!

While I appreciate your well thought out feedback, I think you need to take a second look at the 3D printers. There are schools all over using them to make items that kids are designing in auto CAD. They use up to 100 different materials, depending on the model, and there is no need for prototypes....it IS the prototype AND the final product! You'll see them everywhere soon, I bet 3-5 years they will become cheap enough that home models will be taking hold. I am definitely investing in 3 of these companies that are at the forefront of this. Theyare used for all types of non-technical work now, ...really ...youtube it and look at several videos...I believe it will be a hge change for our future....like regular printers and cell phones have been.

 

[Mandy Flores]

Re: Mandy Flores 1st thread! Let the addiction begin!

Wow you're a real firecracker!

I think I'm more like a water spout or squirt gun....but either way....thanks!