This was asked a while back and the answer was:
So you just need to use an image host like https://pixhost.to in the meantime.
So you just need to use an image host like https://pixhost.to in the meantime.
Guide to the ID Section - Read Before Posting!
- Thread starter Petra
- Start date
Hello. Total newbie! I tried posting a couple jpgs on the Babe ID page, but none of the icons would allow me to upload pics. URL was the only choice. Am I doing some thing wrong?The ID/Name the Babe section has been created so that you, the board members, can help one another identify the babe in unlabeled pictures/videos that you may have on your computer, or that you run across while browsing the internet.
To make a post to get your babe ID'd, do the following:
1.) Make sure you're a registered member to the message board and you're logged in.
2.) Click the orange "+ Post New Thread" button, which is located on the upper left hand side of the forum.
3.) To post an image you can do this in one of two ways:
- Use the attach picture icon (
) to attach 1-3 images.
- Host pictures on an image hosting site by using the insert icon (
). Please note if you choose this option you MUST use a site meant for hosting images, not link directly from someone else's site (i.e. hotlinking).
For more info on using hosting sites plus a list of sites that allow adult content, click here.
4.) All attached images must be verified on the board by moderators. The moderators do their best to approve attachments ASAP, but they have lives too! So please BE PATIENT!
5.) Sometimes people don't know who the babe is, or if the board is busy, your thread will get quickly buried. Please be courteous and keep your thread bumping to a minimum. If you excessively "bump" your thread, this could lead to consequences from a warning to a ban of your account.
Good luck with getting your babe identified! If you have any questions, please consult the Official Board Rules or PM a moderator for help!
Petra
You are not doing anything wrong; it's just the way things are.
You cannot physically upload an attachment (ie. use Freeones for hosting images) until new members have established themselves to a certain extent. ie. made a certain number of posts and also built up a certain amount of 'reaction score' to go with it.
You'll just have to use links to media hosted elsewhere like you have done with your first thread for the time-being.
The first post of this thread that you were referencing could do with an update because it is several years old and no longer completely accurate, however the topic of why the attachment feature isn't appearing for some people has been mentioned in the last few posts in here recently which you obviously didn't see.
Below is a screenshot of what you currently see compared to what you or anyone else reading this can expect to see in the future after the ability to upload attachments is unlocked.
Maybe I'm not very smart but I can't seem to upload a pic from my computer to a new thread? I'm on a Mac computer? All of the "load image" buttons are requesting a URL?
As explained in the previous post above yours, new users such as yourself are limited to entering URLs to display images.
This means you need to use an image host such as imagebam.com or pixhost.to to upload your image. There are loads of different image hosting options out there.
Once uploaded to your host of choice, it will give you a link to your pic which you can simply paste into the box
Alternatively, you can just type IMG tags around the direct link you your image.
e.g.
Code:
[IMG]https://imagehost.com/filename.jpg[/IMG]By clicking the bit above all of the sticky threads and reading the notices.
You should've got a notification when you clicked into this part of the board since the changes were made. You must have closed it without reading it?
Now that explains everything 👍
I do not have the picture attachment option, only a link from file hosting
Yeah, man. That's what I was explaining a few posts up. Newbies like yourself don't get this functionality straight off the bat.
https://www.freeones.com/forums/thr...d-before-posting.573233/page-12#post-11552571
Scroll up to posts 226 & 227.
Basically, you are overlooking where you need to click.
I look forward to making the transition from BETA so that there is literally only one place to look because I've been asked this question a few too many times.
Thank you, but it wasn't very clear until I realized there were two name the babe forums. You Might want to mention that next time someone asks.
Why block returning users from posting to begin with? I've been a member for years and I know very well what rules apply.
Last edited:
The idea was to stop people using the old system and use the new one instead.
For example, had it not been "blocked" as you put it - you would still be posting threads as before and not even know the new section existed.
As it happens, you were stopped from posting as before and still didn't know the new section existed.
I acknowledge that it isn't as clear as it could be but I am working under the conditions that are available to me, and I have made it as clear as I possibly can in numerous messages here, there and everywhere over the last few months.
Like I say, it will soon be all one again and I look forward to it as it will bring an end to this confusion.
What does this mean "You have insufficient privileges to post threads here"
It means you need to scroll up and read post #226 downwards.
Similar threads
- Sticky
- Question